Til lager
BHR-114, Powerline (85 Mbps) Router
BlueJay BHR-114 er hanna til a samnta internetagang, me v a nta raflagnavrana heimilinu og losna annig vi netkaplana. Me v geta margir notendur litlum til mealstrum fyrirtkjum og skrifstofum, samntt eina breibandstengingu fyrir hhraa nettengingu til a vinna me ggn, talsambnd, hlj og vde.
Helstu eiginleikar
Stillingar og stjrnun mehndlu yfir WWW vafra og lykilor vali fyrir agang
Firmware uppfranlegt yfir HTTP
WAN og LAN side connection statistics
ll portin styja sjlfvirka auto-crossover (MDI/MDI-X) tengingu - Engin rf fyrir srstakan crossover kapal
Samhft vi IEEE 802.3 og IEEE 802.3u 10/100 Mbps
Samnttu Internetaganginn raflnunum og einnig innri netkerfin
Stkkar Internetsvi svo a nr yfir allt hsi, .m.t. svi ar sem rlaust netkerfi nr ekki til
DMZ og Virtual Server function provided operating modes innihalda routing, bridge, static IP, PPPoE etc
Hhraa raflnubreytir me tengingu vi neti fyrir hravirkan gagnaflutning yfir raflnukerfi hssins
Hhraa flutningshrainn, 85 Mbps, gera r jafnvel kleift a senda vde DVD gum
No need new wires and use at any power socket with up to ranges of 200 meters
Einfld tenging og auveld uppsetning
Tryggir einkaagang me DES dulkun
Allt a 85 Mbps gagnaflutningshrai raflnukerfinu
BHR-114, Powerline (85 Mbps) Router
The BlueJay BHR-114 is designed for sharing internet access uses the existing electrical wires at home, without pulling new wires. Multiple users in small to medium size offices and homes can share one broadband account and experience a high speed networking capability for data, voice, audio and video.
Configuration and management operated via WWW browser with password protected access
Firmware upgrade via HTTP
WAN and LAN side connection statistics
All Ethernet ports support auto-crossover (MDI/MDI-X) - No need for crossover cables
Compliant with IEEE 802.3 and IEEE 802.3u 10/100 Mbps
Share your Internet access on your powerline and Ethernet Networks
Extends Internet coverage to the whole house, including areas where a wireless network could not reach
DMZ and Virtual Server function provided operating modes include routing, bridge, static IP, PPPoE etc
High-Speed Powerline adapter with Ethernet interface for fast data transfer over the existing household power supply
The high-speed transfer rates of 85 Mbps even make it possible to transmit video in DVD quality
No need new wires and use at any power socket with up to ranges of 200 meters
Simple plug and easy to install
Privacy through DES encryption
Up to 85 Mbps data rate on powerline networking
Specification
Router
DHCP Server and Client
NAPT (Network Address and Port Translation)
NAT (Network Address Translation)
ICMP (Internet Control Message Protocol)
IGMP (Internet Group Management Protocol)
DDNS (Dynamic Domain Name Service)
Security: Password protected configuration access; User authentication (PAP / CHAP) with PPP FirewallF- NAT - NAP
Powerline
Data transfer: up to 85 Mbps
Range: 200 meters
Orthogonal Frequency Division Multiplexing Modulation
Security: 56-bits DES link encryption
Ethernet: Compliant with IEEE 802.3 and 802.3u 10/100 Mbps; All Ethernet ports support auto-crossover (MDI/MDI-X)
Operating environment: Operating: 0 ~50C (32~122F); Humidity: Max. 95% (Non-Condensing)
Management
Firmware upgrade via HTTP
WAN and LAN side connection statistics
Configuration of static routes and routing table
Configuration of NAT / NAPT
Password protected access
Selection of Bridge or Router Mode
PPP user ID and password
Physical Interfaces: 10/100 Mbps RJ-45 x 4 - RJ-45 WAN Port x1 - Power Jack x1 - 3 LEDs: WAN, Power and switching hub status
Minimum System Requirements
Any computer with an Ethernet 10/100 Base-T interface
Any operating system that supports an Ethernet connection with an IP stack
Okkar vrunmer: 7163